Product features

◆ high precision ad for 10V bridge, readability up to 1 / 60000,

◆ high speed AD, the fastest speed is 200 times / s, which can be taken out one by one through the field bus interface

◆ standard MODBUS-RTU field bus output, optional CC-Link and other interfaces

◆ optional analog output 4 ~ 20mA, 0 ~ 20mA, 0 ~ 5V, 1 ~ 5V, 0 ~ 10V. Configure the output mode by software, adjust the zero point and gain

◆ standard 4-way switch output and 2-way switch input, which can be controlled through field bus interface, or programmed by similar PLC instructions, to meet various control processes

There are three calibration methods: fast calibration, separation calibration and weight free calibration

◆ nonlinear correction of the maximum 5 segments

◆ dual backup parameter storage, hardware write protection function, software configurable

◆ the serial port function can be configured, and can be connected to peripheral devices such as computer, serial port printer, large screen, etc

Product parameters

Display: 6-bit 0.4-inch nixie tube display, 6 status indicators

◆ key: 6 touch keys

Sensor interface: 6-wire system, can connect 1-4 350 ohm analog sensors

◆ bridge supply voltage: 10VDC, 150mA

◆ AD conversion mode: ∑ - △ conversion mode

AD conversion resolution: 24bit

◆ AD conversion speed: 10 ~ 200 times / S (software can be set)

◆ power interface: 24VDC (18-36V), 6W

◆ working temperature: - 10 ℃ ~ 40 ℃

◆ isolation protection: adopt full isolation design, with isolation voltage greater than 1500V / DC

Standard interface

◆ MODBUS-RTU interface (RS485 / RS232 adaptive), baud rate 4800 ~ 115200 can be set

◆ 2-way switch input, 4-way switch output (transistor OC gate output), function programmable

Optional interface

◆ 16bit high precision analog quantity 4 ~ 20mA, 0 ~ 20mA, 0 ~ 5V, 1 ~ 5V, 0 ~ 10V

◆ switch value expansion, 4-channel input and output, software configurable input and output

◆CC-LINK